top of page
Rowing Sleeves & Buttons

 

The easily distinguishable Croker pink was first introduced in 1992 when Kaye Croker decided she could make masculine rowers use pink. What started as a threat has become the hallmark of Croker genuineness and quality.

 

Our Croker pink sleeves, teamed with our yellow buttons, make a Croker Oar impossible to miss. 

All Croker rowing oars are fitted with a copolymer interlocking injection moulded sleeve and button system.

​

There are three different types of sleeves to choose from - the new Mark 4, Mark 3 and Mark 1.

Sleeve_Button_FB-1500x1200-light-2.jpg
Introducing
the Quick
Adjustment Rowing Button & Mark 4 Sleeve

​

Firmer lockup while maintaining smoothness of the Croker Sleeve.

​

No tools needed for adjustment!

​

Available for Arrow Rowing & Standard Rowing Shafts.

​

Requires new MARK 4 Rowing Sleeve.

Sleeve_Button_FB-1500x1200-2.png
Mark_4_Sleeve_single.png
Mark 4 (MK4)

​

Specially designed for the new adjustment button, held together with plastic interlocking clips. It is more stable with a larger surface area making the square and feather position more positive. 

​

Fits Arrow M47, M49 and standard M4, M2 shafts

 

M3__sleeve_sep-colour_adj.png
Mark 3 Asymmetric (MK3)

 

Introduced in 2008, the Mark 3 was a major upgrade to the Mark 1 symmetrical sleeve and is held together with plastic interlocking clips. This double ended sleeve performs better because it only has two flat surfaces. The asymmetric design reduces the distance between the shaft and the swivel face. It is more stable square or feathered and positive in its movement, squaring and feathering. This asymmetric design is not recommended for use with the Magik or Martinoli swivels as these swivels produce excessive wear on the sleeves.

 

MK1_Scull_Sleeve_clip_edited.png
Mark 1 Symmetrical (MK1)

 

The MK1 rowing sleeve comes in two parts, the sleeve body and the clip (back). The inboard measurements are calibrated on the back of the clip. The geometry of the rowing sleeve, if combined with rowlocks that have a 95 degree inside corner, provides excellent stability at the catch. The rowing clips can be replaced as required without removing the sleeve. This sleeve is available in two sizes: M2 which is designed for our M4 or  M2 shafts and the M1/M5 which is designed for our M1 and M5 shafts.

 

New Mark 4 button

 

QUICK ADJUSTMENT LEVER

Fits new Mark 4 sleeve - Arrow and Standard Shafts

 

Sleeve_Button_FB-1500x1200-2.png
Quick_release_Button-front.png
Mark 4 button - Standard

 

NO LEVER

Fits new Mark 4 sleeve - Arrow and Standard Shafts

 

Button-front-no-lever.png
Mark 1 & Mark 3 Buttons

These buttons are paired up with MK1 or MK3 rowing sleeves. 

​

 

MK1 Button
MK1 Button
MK3 Button
MK3 Button
bottom of page