MK1 ROWING SLEEVE COMPLETE - M1 & M5 SHAFTS

MK1 Symmetrical (MK1 / M5) - To Fit M1 & M5 Shafts Only
The MK1 rowing sleeve comes in two parts; the sleeve body and the clip (back). The inboard measurements are calibrated on the back of the clip. The geometry of the rowing sleeve, if combined with rowlocks that have a 95 degree inside corner, provides excellent stability at the catch. The rowing clips can be replaced as required without removing the sleeve.
Replacement of Sleeves is NOT as simple as just removing the old and fitting the new. You will need to remove the old sleeve and resin then refit using Epoxy Resin as well as ensuring that the sleeve is fitted at the correct angle. If you do not feel confident in doing this yourself or know anybody who may be able to do it for you please contact use.